How-To: Get around Mac OS X 10.6.3 update issues

Posted by:
Date: Wednesday, March 31st, 2010, 05:10
Category: How-To, Software

snowleopard

The Mac OS X 10.6.3 update is out in its Software Update, Delta and Combo forms and a number of users (including the mighty Hawk of Applegeeks) have cited problems installing the update. In many cases, the user apparently has to sit forever with the spinning color wheel, or go blank to a blue, black, or gray screen and require a forced restart.

Most hangs at installation usually happen when the system is running more maintenance-based routines or performing commands like restarting, so the system will not necessarily be hurt; however, there is always the chance that files can get corrupted by interrupting the installation process.

With that in mind, the cool cats at CNET have offered the following update tips:

If your computer hangs during installation, try the following steps:

Give it time:
Many times the system will sit at a blue or black screen for a while, so be sure to give it ample time before concluding the system is hung up. Let it sit there for about half an hour to see if it resolves the hang and continues the installation process properly.

Hard-reset only if the system is not doing anything:
If the system does not respond after waiting, only hard-reset it if the hard drive is not working. Put your ear to the case of the system to hear if the drive is working. If so, wait until you cannot hear the drive chattering away and then press and hold the power button until the system shuts off.

Immediately boot to safe mode:
Once the system has been powered down, boot it up and immediately press the Shift key to go to Safe Mode. This will run some diagnostics scripts at boot-up, and also load the OS in a minimal way to prevent any interference. When booted, run Disk Utility’s permissions fix and hard-drive verification routines, as well as run any maintenance utilities you may have for cleaning the system’s temporary files (caches, etc.).

Reapply the combo updater:
Even if the system seems to be working fine, after any fault in the installation it is always best to re-run the installation using the “Combo” updater. This will ensure that all installed files are in working order, and prevent any currently unused but corrupt files from causing problems later on. We recommend you download the Combo updater and run it when booted in Safe┬áMode.

Check permissions after installation:
Once you have completed the installation with the Combo updater, use Disk Utility to run a full permissions fix on the hard drive. This will ensure that all updated files are properly accessible by the system, and prevent slowdowns and hangs that could result if the system cannot access these files.

Start over from backup:
If the installation is still not working properly, even after reapplying the Combo updater, then it is highly recommended you start over. This can be done by reverting to a backup you made before applying the 10.6.3 update (Time Machine or a cloned drive), or by performing a reinstall of the OS from the Snow Leopard DVD. When you have reverted to the backup, be sure to fully prepare your system for the update by following the procedures suggested in this article.

Full reinstall:
Reverting to a backup is the preferred method, since it will keep all of your settings and program installations intact; however, some people may not have this in which case a reinstallation may be necessary. Snow Leopard will perform an archive and install, which will preserve user data and installed applications, so reinstalling should keep most settings intact.

If you’ve installed Mac OS X 10.6.3, feel free to hurl your two cents in as to how the update’s going and what’s gone right or wrong for you.

Apple “rejiggers” iPhone to ease load on AT&T network

Posted by:
Date: Wednesday, March 31st, 2010, 05:25
Category: iPhone, News

3gs.jpg

A new report profiling AT&T’s bandwidth troubles posed by millions of iPhone units reveals that AT&T had Apple modify the handset to ease strain on the company’s network. Per the Wall Street Journal, AT&T Chief Technology Officer John Donovan said he and other executives flew to Apple’s Cupertino, Calif., campus to give the handset maker a “crash course in wireless networking.” With regular return meetings at Apple, AT&T employees helped the iPhone designers create new technologies to limit the strain on the wireless provider.

“Apple rejiggered how its phones communicate with AT&T’s towers,” the report said. “As a result, the phones now put less of a load on the network for such simple tasks as finding the closest tower or checking for available text messages.”

Donovan told the Journal that Apple’s designers are now “in a Master’s class” on networking, having learned the basics and worked with AT&T to improve the iPhone dramatically. Exactly what changes were made, and whether they were hardware or software based, were not revealed.

The article also revealed that AT&T executives set up a 100-day play in December of 2009 to improve the company’s network in large cities where users most commonly experience dropped calls. A random performance test released in February found that AT&T’s 3G network speeds had improved by 84%.

But the Journal also noted Tuesday that AT&T is still “racing” to improve its network as Apple is rumored to be working on a CDMA capable iPhone that could be headed to the Verizon network as soon as this year.

Apple releases iTunes 9.1 Update

Posted by:
Date: Wednesday, March 31st, 2010, 04:27
Category: Software

blueituneslogo.jpg

Late Tuesday, Apple released iTunes 9.1, the latest version of its multimedia/jukebox application for Mac OS X. The new version, an 93.6 megabyte download, offers the following fixes and changes:

– Sync with iPad to enjoy your favorite music, movies, TV shows, books and more on the go.
– Organize and sync books you’ve downloaded from iBooks on iPad or added to your iTunes library.
– Rename, rearrange, or remove Genius Mixes.

iTunes 9.1 is available via Mac OS X’s Software Update feature and requires Mac OS X 10.4 or later to install and run.