Apple strips AirPrint support for second-gen iPod touch devices

Posted by:
Date: Monday, October 4th, 2010, 10:42
Category: iPod Touch, News, Software

Per 9 to 5 Mac, Apple has revised its original AirPrint announcement, removing promised support for the second-generation iPod touch device. Still in development, AirPrint automatically finds printers on local networks that can print text, photos, and graphics wirelessly over Wi-Fi networks without the need for additional drivers or software.

Apple’s original documents stated that printing would only be supported on iOS devices that support multitasking, yet listed the second-generation iPod touch as compatible. The second-generation iPod touch has since been removed from the compatible device list.

This marks the second incident in the last few months where Apple has revised its list of supported devices before a software update’s official launch, as it removed Game Center support for the iPhone 3G and iPod touch 2G while it was still in beta testing, only to once again include support for the second-gen touch shortly before the feature’s debut in iOS 4.1.

Second-gen Apple TV may be causing video distortion on older TVs

Posted by:
Date: Monday, October 4th, 2010, 05:54
Category: Apple TV, News

Apple’s long-awaited second generation Apple TV may be spiffy, but there may be bugs to sort out.

Per CNET, the set-top box may cause video distortion and users have reported that the new Apple TV may not be compatible with some television sets only five years old.

User jitterysquid first posted the issue in the Apple Support Discussions board:
“I got my new Apple TV gen 2 today and hooked it up in place of the old one. The picture was wavy. I removed the HDMI switch from the equation, no dice. I swapped cables, no dice.

The only issue I can think of (besides bad hardware) is that I use an HDMI->DVI cable for the last leg to my TV. It’s not a converter, it is fully HDCP aware, and it works fine with ATV G1 and a Roku for Netflix HD streaming.”

Other users have chimed in, stating that they are having the same issues and that a straight HDMI > HDMI cable has not solved the issue. The common theme, though, seems to be the age of the television sets that users are attempting to connect the new Apple TV to–approximately five years or older.

The official tech specs on the new Apple TV on Apple’s Web site read:
“Compatible with high-definition TVs with HDMI and capable of 720p 60/50Hz,2 including popular models from these manufacturers: Hitachi, JVC, LG, Mitsubishi, NEC, Panasonic, Philips, Pioneer, Samsung, Sony, Sharp, Toshiba, Vizio, Westinghouse”

Though many all of the forum posters claim their televisions are capable of full 720p, there still seems to be an issue. Most users have also reported that the same Apple TV unit works on newer HD TVs they tested. It is possible the issue could lie in a setting on the TV itself. Be sure your set is not configured to stretch incoming signals to 1080i. If so, set it to 720p and you should get a clearer picture.

The other possibility is that the Apple TV software is not sending a signal that is completely usable by older HD TV models. If this is the case, expect Apple to release updates that continue to include television compatibility (along the line of printer driver updates).

Stay tuned for additional details as they become available and if you’ve seen this issue on your end, please let us know.

Rumor points to touchscreen displays for next-gen iMacs

Posted by:
Date: Monday, October 4th, 2010, 04:02
Category: iMac, Rumor

newimac.jpg

With rumors of a new generation of iMac on the horizon, one of the more interesting details has pointed to a potential new touchscreen display for the upcoming desktop.

Per DigiTimes, component supplier Sintek Photronics has sent samples of capacitive touch panels to Apple for a new touchsreen all-in-one iMac desktop computer. The report claimed that the new hardware will have screen sizes of 20″ and greater.

“The new iMac is rumored to have a good vertical and horizontal viewing angle, and its projected capacitive touch panel will adopt a one-glass solution, which integrates the touch sensor and cover glass, to reduce thickness and weight,” the report said.

It noted that most touch panels are made by placing the sensor over the panel, and are then covered with glass. But it is said this method is costly, complex, and results in a dimmer screen.

It was said that Sintek Photronics “has a good chance” of becoming a supplier for the alleged new line of iMacs. No projected release date for the rumored hardware was given.

In January of this year, rumors indicated that a 22″ touchscreen iMac would launch this year. But the claims in Friday’s report that Apple is still testing touch panels would suggest that a 2010 launch is not likely.

A number of patent applications from Apple this year show touch-capable iMac-style desktop computers. One interesting filing shows a machine that could operate in a traditional format, but with a hinge on the back that would allow it to be tilted for easier access for a user’s fingertips.

Another application described a desktop screen that could detect shapes and objects pressed against it. It described a machine that would allow new types of input, such as a security system that required a physical key to be pressed against the screen and detected.

Stay tuned for additional details as they become available.