Leaked “iPad mini” display case instructions hint at smaller iPad for holiday season

Posted by:
Date: Thursday, October 11th, 2012, 08:05
Category: iPad, Rumor

If it’s not the suppliers that offer interesting hints as to upcoming products, it’s the retailers.

Per AppleInsider, one retailer is preparing in advance for the rumored device by sending out in-store displays to sell accessories to customers.

A leaked image shows instructions for standalone displays designed to sell iPad mini accessories. The instruction manual comes from a large box that apparently includes parts from which the future displays will be assembled.

The tipster indicated that the pages labeled “Amazon/Apple Tablet Display Parts List” came from a box with a note attached, telling employees not to look inside. They said the papers fell out of the box, revealing the contents of the recently delivered package.

Exactly what store the display parts were shipped to was not provided, but the design shown in the illustration looks similar to in-store displays seen at major retailers such as Best Buy or Target.

The shipment comes after a list of dozens of supposed “iPad mini” cases were revealed in a spreadsheet on Wednesday. That list of products suggested that third-party accessory makers Belkin, Kensington and Trust all have cases for Apple’s smaller iPad ready to go.

The fact that the name “iPad Mini” is included on the design of the accessory display should not be taken as a confirmation that it will be the final name of the rumored product. Because the name of the iPhone 5 was not known as case-makers built accessories based on leaked schematics, many cases available for sale at launch came in boxes that simply advertised they were for the “New iPhone.”

Case makers have bet — and lost — on rumored Apple product designs before. In 2011, some third-party accessory makers banked on a completely redesigned look for Apple’s next iPhone, but that October the iPhone 4S debuted with a design nearly identical to its predecessor, the iPhone 4.

Similarly, one report this week claimed that a major accessory maker had halted production of cases designed for the so-called “iPad mini”. Manufacturing of those cases was reportedly stopped because of an apparent “design change” that caught the manufacturer-off guard.

Apple is expected to hold an event later this month to officially unveil a smaller iPad with a 7.85-inch display. The company is said to have ordered more than 10 million units for sale this holiday shopping season.

Stay tuned for additional details as they become available.

iFixit completes, posts full teardown report of fifth-generation iPod touch

Posted by:
Date: Thursday, October 11th, 2012, 08:06
Category: Hardware, iPod Touch, News

The fifth-generation iPod touch is now available and shipping. And, that being said, it’s time to dissect the new media player to see what makes it tick.

Per the super cool cats at iFixit that posted their most recent teardown, the disassembly also found that the volume buttons, microphone, LED flash and power button are all connected via the same ribbon cable that easily peels from the rear case.

“We’ve seen this type of design in previous Apple products,” the solution provider noted. “The shift to a single ribbon cable is more cost-effective for the manufacturer, but unfortunately it has a negative impact on repairability.”

The battery inside the iPod touch was described as a “Plane Jane” component with a rating of 1030 mAh, an increase from the previous model’s 930mAh. The battery is advertised to provide up to 40 hours of music playback on a single charge.

iFixit also found that the 4-inch Retina display on the fifth-generation iPod touch is inferior to the screen on the iPhone 5. It characterized the iPod touch screen as “a much simpler, cheaper design.”

The teardown also offers a closer look at the 5-megapixel camera Apple has put into the fifth-generation iPod touch. The lens is capable of recording high-definition 1080p video at 30 frames per second.

The full list of parts found in the fifth-generation iPod touch are included below:
- A5 Processor

- Hynix H9TKNNN4KDBRCR 512 MB RAM

- Toshiba THGBX2G8D4JLA01 32 GB NAND flash

- Apple 3381064 dialog power management IC

- Murata 339S0171 Wi-Fi module

- Broadcom BCM 5976 touchscreen controller

- Apple 33831116

- STMicroelectronics AGD32229ESGEK low-power, three-axis gyroscope

- Texas Instruments 27AZ5R1 touchscreen SoC

If you’ve gotten your new iPod touch in the mail and had a chance to play with it, please let us know what you make of it in the comments.

Microsoft flatly denies Office for iOS rumor

Posted by:
Date: Thursday, October 11th, 2012, 08:05
Category: iOS, News, Software

microsoftlogo.jpg

Well, this was a bit far-fetched to begin with.

Following up on yesterday’s story regarding Microsoft Office arriving for iOS and Mac OS X in 2013, the rumor was crushed via a single tweet from Microsoft corporate communications lead, who stated that the comments made by the Czech team are “inaccurate.”

Still, it was a bit odd that a manager for the company’s Czech marketplace had this sort of information to leak or announce to the public at large.

The wait continues and stay tuned for additional details as they become available.

Flip4Mac updated to 3.0.0.126

Posted by:
Date: Thursday, October 11th, 2012, 07:33
Category: News, Software

flip4mac.jpg

Early Wednesday, software developer Telestream has released version 3.0.0.126 of Flip4Mac, its QuickTime components package which allows for Windows Media files to be viewed, imported and converted under Mac OS X. The new release, a 62.1 megabyte download, includes the following fixes and changes:

New Features:
- Introduced the new Flip Player application for playing, editing, and transcoding video and audio. Flip Player supports unique features such as dimming the background, cropping video, and creation of iPhone ringtones. It also supports exporting to Apple and Telestream applications, exporting to Apple devices, and Windows Media. Flip Player replaces the WMV Player application.

- All software is now signed with a digital certificate from Apple to address security and anti-malware requirements in Gatekeeper.

- Added support for the application/x-ms-wmp mime type.

- Added 64-bit Core Audio support for OS X 10.8 Mountain Lion.

Fixes:
- Flip4Mac will now continue playing even if it encounters corrupted audio packets, as long as there are enough valid packets to prevent a perceptible problem with the audio.

- Fixed a bug that prevented Flip4Mac from opening local wvx files.

- Fixed a bug that prevented MMS stream playback and resulted in a -19160 error.

- Fixed potential crashes and memory leaks.

- Fixed various issues with QuickTime X Player 10.2 in OS X 10.8 Mountain Lion.

Flip4Mac 3.0.0.126 is available for free but can go as high as US$179 depending on the version purchased. The new version requires an Intel-based Mac running Mac OS X 10.7 or later to install and run.

If you’ve tried the new version and have any feedback to offer, please let us know in the comments.