Apple releases iMac EFI Firmware Update 2.1 for late-2013 iMacs

Posted by:
Date: Wednesday, September 25th, 2013, 13:24
Category: iMac, News, Software

Never doubt a firmware update.

On Wednesday, Apple released version iMac EFI Firmware Update 2.1 for its just-released late 2013 iMacs. The update, an 8.7 megabyte download, offers the following fixes and changes:

- This update addresses an issue which may cause a black screen to appear when installing Windows 7 or Windows 8 using Boot Camp Assistant if both an external optical drive and USB thumb drive are connected to the system. This update also ensures that the system will boot by default into OS X after installation of Windows 8.

The update requires a late-2013 iMac running OS X 10.8.4 or later to install and run and can also be downloaded and installed via OS X’s Software Update feature.

If you’ve tried the update with your new iMac and have any feedback to offer, please let us know in the comments.

AppleCare+ policies to change, will allow for hardware repairs in any country where AppleCare+ is offered

Posted by:
Date: Wednesday, September 25th, 2013, 07:48
Category: Apple TV, AppleCare, iPad, iPhone, iPod, News

applecare

If you travel with an AppleCare-covered device, you might like this.

Per AppleInsider and TechCrunch, it was revealed on Tuesday that Apple has changed the terms and conditions tied to AppleCare+ and will be lifting geographic limitations on support, meaning travelers can get their device serviced outside of their home country.

As noted, the recent policy change allows owners to take in products for repair in any country where AppleCare+ is offered, lifting previous restrictions that limited service to the country in which the plan was purchased. Devices include the iPhone, iPad, iPod, Apple TV, Apple displays and Mac models.

It should be noted that replacements and repairs may not be offered in all countries. The publication offers the CDMA version of the iPhone 5 as an example, pointing out the handset can’t be serviced or replaced in countries where it is not sold, like Brazil.

The changes are likely part of Apple’s continued effort to overhaul its post-sales service. When the iPhone 5s and 5c were unveiled on Sept. 10, it was announced that the AppleCare+ for iPhone per-incident deductible would be raised to US$79, up from US$49 previously.

Currently, AppleCare+ for iPhone, iPad and iPod is offered in Austria, Canada, China, France, Germany, Hong Kong, Ireland, Italy, Japan, Netherlands, Singapore, Spain, Switzerland, the UK and the US.

Stay tuned for additional details as they become available.

iSuppli runs numbers, finds $199, $183 build costs for iPhone 5s, 5c handsets

Posted by:
Date: Wednesday, September 25th, 2013, 07:47
Category: Hardware, iPhone, News

eliphone5s

If you’re wondering how much Apple’s new iPhone handsets cost to manufacture, they’ve got a number.

Per AllThingsD, a forthcoming IHS iSuppli report posits that Apple spends at least US$191 on components to build a 16GB model of the iPhone 5s and between US$167 and US$176 for a low-end iPhone 5c. Those prices are just a few dollars lower than what Apple spent in order to build the iPhone 5 according to iSuppli’s year-ago report on that device. The firm adds another US$8 in assembly costs for the iPhone 5s, while iPhone 5c assembly tacks on another US$7 to assemble, giving full construction estimates of US$199 for the 5s and between US$173 and US$183 for the 5c.

The iPhone 5, released in 2012, cost Apple about US$205 to produce and sold for between US$649 and US$849 off-contract. Apple saves about US$13 to produce the new high-end iPhone, even considering its beefed up processor and biometric sensor, and Apple sells it for the same price point.

Memory capacity plays a part in the price of an iPhone, with the jump from a 16GB module to a 64GB module adding US$19 to the component cost, plus another US$8 in assembly.

The display components are among the biggest cost contributors for the device, though, amounting to US$41 out of the component cost. IHS believes that Apple’s displays came from a number of vendors, including Sharp, Japan Display Inc., and LG Display.

The use of a polycarbonate shell for the iPhone 5c helps Apple drop the component cost of what is essentially an iPhone 5 even further. Whereas the iPhone 5 was machined from a single piece of aluminum in a costly process, Apple spends only US$173 to build a 16GB iPhone 5 model and US$183 to build the 64GB model.

IHS’ look at the new iPhones seems to agree with some observers’ opinion that the iPhone 5s, despite the addition of a number of technologies, is more of an incremental progression over its predecessor.

“I would say that they’re almost the same phone,” said IHS analyst Andrew Rassweiler, “except for that the 5s has the fingerprint sensor, the A7 processor and some newer memory chips that consume less power. Beyond that, they’re basically the same.”

The lower production cost per unit could work in Apple’s favor going forward. The Cupertino company recently revised its guidance for the September quarter after selling more than nine million new iPhone units in the launch weekend. Part of that guidance revision was to orient investors to look toward the upper range of its previous estimate, possibly due to the improved margins on its hot-selling new devices.

Stay tuned for additional details as they become available.

VMWare releases Fusion 6.0.1 update

Posted by:
Date: Wednesday, September 25th, 2013, 07:32
Category: News, Software

Late Tuesday, virtualization softare maker VMWare released version 6.0.1 of its Fusion software for the Mac.

Similar to other virtualization software packages, VMWare allows users to run alternate operating systems such as Windows and Linux distributions on Intel-based Macs at native speeds. Other features, such as Unity, allow users to run and minimize Windows applications from the Mac OS X Dock.

The new version, a 244.6 megabyte download, can be found here and offers the following fixes and changes:
Addressed an issue that caused VMware Fusion 6 to crash when opening
- Improved support for Boot Camp on 2013 Macs.

- Improved detection of Windows 8.1 and Windows Server 2012 R2 media.

- Resolved an incompatibility with certain USB audio devices.

- Resolved an issue where Cubase could cause virtual machines to not power on.

- Addressed a graphics issue when switching between spaces in single window mode.

Fusion 6.0.1 retails for US$59.99 and requires an Intel-based Mac, 2 GB of RAM, Mac OS X 10.6.7 or later (10.7 recommended) and a copy of Windows (if you’ll be installing Windows).

If you’ve tried the new version and have any feedback to offer, please let us know in the comments.