Aussie-based tech shop iExperts performs initial teardown of iPhone 5s, reports findings

Posted by:
Date: Thursday, September 19th, 2013, 14:56
Category: Hardware, iPhone, News

eliphone5s

The Aussies completed an initial teardown of the iPhone 5s and there are some impressive components inside.

Per The Unofficial Apple Weblog and Australia-based tech shop iExperts, the guys at iExperts were able to remove the standard pentalobe screws holding the handset together, then used a suction cup to remove the screen. The team noticed that there’s a special cable that connects the Touch ID sensor on the iPhone 5s to the charging port assembly — not sure of the reason, but some speculation has indicated that it’s for grounding the sensor when the iPhone is docked and charging.

The batteries on the new devices have higher capacities than the one on the iPhone 5 (5.45 Whr), with the iPhone 5s coming in at 5.92 Whr and the iPhone 5c at 5.73 Whr. Those batteries, according to iExperts, are made by Apple Japan, something they’ve never seen before on iPhone batteries.

The logic boards for the new iPhones are quite compact in comparison to the one in the iPhone 5, and iExperts noted that the 5s and 5c boards share a similar design. The team also marveled at the “incredible functionality for such little circuitry” found in the Touch ID sensor on the 5s (below).

If you’re one of those people with an iPhone 4, iPod touch, iPod nano (sixth generation) or iPhone 5 that had a power switch failure, you’ll be happy to know that the switch assembly has been changed in the new iPhones.

The iExperts team will be posting more information on the chips located on the logic board later, so bookmark the page for additional information as it becomes available.

Recent Posts