SpamSieve updated to 2.8.6

Posted by:
Date: Thursday, July 7th, 2011, 02:26
Category: News, Software

spamsieve2.jpg

Michael Tsai’s must-have shareware program, SpamSieve, has just been updated to version 2.8.6. The new version, an 8.3 megabyte download, makes the following fixes and improvements:

- Made various changes to improve SpamSieve’s filtering accuracy.

- Improved compatibility with Mac OS X 10.7 (Lion).

- Added support for Postbox 2.5.

- Updated the Setting Up MailMate instructions for the new preferences in MailMate 1.1.2.

- Updated the Setting Up Outlook instructions for Microsoft Office 2011 Service Pack 1.

- Updated the Setting Up Postbox instructions to ensure that messages that you train as spam are moved to the junk mailbox or trash.

- Worked around a rare OS/hardware condition that could prevent SpamSieve from launching.

- The Apple Mail plug-in is better at reporting errors when it’s unable to fully load itself.

- Made various other clarifications to the manual.

- Adjusted the help page titles to fit better in the menu and search results.

SpamSieve is available for a US$30 registration fee and requires Mac OS X 10.4 or later to run. The new version can either be downloaded directly from the web site or brought up to the current version via the program’s built-in update feature.

Skype updated to version 5.2.0.1523, offers assorted bug fixes

Posted by:
Date: Wednesday, July 6th, 2011, 03:47
Category: News, Software

skypelogo.jpg

On Wednesday, version 5.2.0.1523 of the Skype VoIP application went public. The new version, a 20.8 megabyte download, offers the following fixes and changes:

- Improved Multi-tasking

- Group Screen Sharing

- Sidebar enhancement

- Support for Mac’s built-in HD and Logitech’s B910 HD cameras

- Minor bug fixes

Skype 5.2.0.1523 requires Mac OS X 10.5.8 or later to install and run.

If you’ve tried the new version and have any feedback to offer, please let us know.

Rumor: Apple to use Toggle DDR 2.0 NAND flash memory in next-gen MacBook Air

Posted by:
Date: Tuesday, July 5th, 2011, 03:17
Category: MacBook Air, Rumor

If you’re hankering for cool details about features for Apple’s next-gen MacBook Air, you might like this.

Per Macotakara, Apple is rumored to adopt “Toggle DDR 2.0,” a 19-nanometer process for NAND flash memory offering 400 megabyte-per-second speed, in its next MacBook Air.

Citing a person with an “Asian electronics component company,” the report said that the new technology will replace the Blade X-gale found in the current MacBook Air models.

The new 19-nanometer flash memory is said to be packaged on a smaller chip, and will be soldered onto the base circuit of the new thin-and-light notebook directly.

The report noted that the Open NAND Flash Interface Working Group, which standardizes NAND flash, has released the ONFi 3.0 specification for 400MBps speeds, but most memory processing companies do not yet offer compatible chips. It said that “Toggle DDR 2.0,” which is a standardized procedure from the JEDEC Solid State Technology Association, is believed to have been embraced by Apple.

Apple’s MacBook Air was made thinner and lighter with a new model released last October that features instant-on capabilities with no hard drive and no optical drive. The ultraportable notebook sports only NAND flash memory for storage.

That storage was initially provided by Toshiba, but later changed to Samsung. The change allowed for read times to be upgraded to 261.1MBps, from 209.8Mbps, while write times were boosted to 209MBps from 175.6MBps.

Rather than relying on traditional 2.5-inch or 1.8-inch SSDs, the new MacBook Air drives utilize a new form factor known as mSATA. After the thinner and lighter MacBook Air was unveiled last year, Toshiba announced its Blade X-gale SSD series, the same hardware found in Apple’s thin-and-light notebook.

Apple is said to have built nearly 400,000 of its next-generation MacBook Air last month in preparation for a launch that is expected to occur soon. The anticipated new notebooks are believed to feature Intel’s latest Sandy Bridge processors, as well as the new high-speed Thunderbolt port.

While new MacBook Air hardware is expected to launch soon, it will not debut until Apple’s next-generation operating system is released. It’s also been reported that Apple would freeze the introductions of new Mac hardware until Mac OS X 10.7 Lion is released. The “Golden Master” of Lion was released to developers last week.

Stay tuned for additional details as they become available and let us know what’s on your mind in the comments.

Happy Fourth of July from the PowerPage!!!

Posted by:
Date: Monday, July 4th, 2011, 03:10
Category: Announcement

Happy Fourth of July from O’Grady’s PowerPage, where the staff will be taking the day off to celebrate the holiday, grab some tasty barbecue and spend time with friends and family prior to watching rather large (and nifty) explosions in the sky tonight.

We’ll be back tomorrow with additional Mac and iOS mobile technology coverage, so enjoy the holiday and Happy Fourth, wherever you may be!!!

Apple releases Mac OS X 10.7 gold master to developer community, upgrade due this month

Posted by:
Date: Friday, July 1st, 2011, 10:40
Category: News, Software

As July begins, Mac OS X 10.7 (“Lion”) is due to hit this month and as of Friday, Apple has released Lion’s Gold Master (GM) seed to developers.

Per Macworld, The GM release traditionally signals the last major internal update before the release to the general public; save any major issues, this version (labeled build number 11A511) of Lion should be the one consumers will see later this month.

Lion still has no official release date from Apple beyond the nebulous “July”, but we’ll keep you informed as to any news or changes as they become available.


Initial tests show promising Thunderbolt speeds, ability to boot off new port

Posted by:
Date: Thursday, June 30th, 2011, 04:26
Category: Hardware, News

A newly published series of test results from the cool cats at AnandTech shows Apple’s newly adopted Thunderbolt technology blows FireWire 800 out of the water with data transfer speeds to an external RAID system at 700MB/s.

After the release of Apple’s Thunderbolt cable on Tuesday, early impressions have begun to surface on the Web. The AnandTech staff got their hands on both the US$49 cable and the US$1,999 Promise Pegasus R6 system and have subsequently stated that they are able to write to the 12TB RAID array at nearly 700MB/s while on a notebook. The speed obliterated that of the commonplace USB 2.0, as well as FireWire 800.

In his testing, Anand Shimpi also revealed via Twitter that external drives can be booted from via Thunderbolt. This makes it possible to have a full install of OS X, which includes all your files and apps, stored on a Thunderbolt external drive. This in turn would allow you to take your computer everywhere you go, and run it on another Thunderbolt-equipped Mac.

Per Macworld’s test of the new cable with the same RAID system, their detailed results show Thunderbolt is between 4 and 21 times faster than FireWire & USB 2.0. When compared to both on a 2.2GHz Core i5 Macbook Pro, Thunderbolt could write a 2GB file at 210.5 MBps.

On the other hand, USB 2.0 could only stretch to 29.7 MBps, a result that is 7.09 times slower. FireWire 400 could write the file at 30.2MBps, 6.97 times slower & FireWire 800 wrote the file at 47MBps, or 4.47 times slower.

Also Tuesday, Apple issued a series of 10 questions and answers related to Thunderbolt. Most of the information presented was already announced, like the fact that the cable offers two independent channels of 10GBit/s.

One new bit of information from the series of answers is a possible drawback for high-end Macbook Pro users: A PCI Express Card in the Express Card slot cannot be operated if the system is connected to a Thunderbolt device. Apple recommends disconnecting the device if you are going to use the Express Slot.

The full list of info is included below:

1. What is the maximum bandwidth supported by Thunderbolt to Thunderbolt cable (2 m)?

Thunderbolt utilizes two separate 10Gbps links—one for displays and one for PCI-E device trafffic—for throughput of up to 10 Gbps between Thunderbolt capable devices and your Mac. Some devices not made by Apple may support different bandwidth rates; consult any documentation that came with your Thunderbolt-enabled device for information specific to your device. Choose the Disk Activity tab in Activity Monitor to read current disk activity statistics, which may be helpful to determine disk activity with storage devices using Thunderbolt. Some storage devices may have a maximum transfer rate lower than the bandwidth potential of Thunderbolt.

2. What is the proper way to insert a Thunderbolt cable into my Thunderbolt-capable device or Mac?

The Thunderbolt symbol should be on the top of the connector. You can plug either end of the cable into a device or Mac; the connectors on each end are the same. Do not force the Thunderbolt cable into your Thunderbolt-capable device or Mac computer’s Thunderbolt port.

3. How do I confirm a Thunderbolt-enabled device is connected to a Mac?

Open System Profiler and examine the Thunderbolt tab for a list of any connected Thunderbolt devices.

4. Can I use a Thunderbolt cable to connect a Promise, La Cie, or other third-party storage device that uses Thunderbolt?

Yes. You can use a Thunderbolt cable to connect any Thunderbolt-enabled device or Mac.

5. Is there a maximum supported length for using Thunderbolt cables with Apple products?

Thunderbolt cables should not exceed two meters for maximum performance. Apple Thunderbolt to Thunderbolt cable (2 m) is two meters in length. Some Thunderbolt devices include an extra port you can use to connect other Thunderbolt devices downstream with additional Thunderbolt cables.

6. Why is there a black screen when I use a Thunderbolt cable to connect to an Intel-based iMac that supports Target Display Mode?

Although a Thunderbolt cable will fit into Mini DisplayPort connections, only Mini DisplayPort cables can be used to in Target Display Mode with an iMac (Late 2009) or iMac (Mid 2010) connected to a Thunderbolt-enabled Mac; iMac models produced before 2011 do not support Thunderbolt cables or devices. If you have an iMac (Late 2009), make sure you have the 27-inch SMC iMac Firmware Update 1.0 installed to avoid issues waking from sleep in Target Display Mode.

7. What do I do if my Mac doesn’t have a Thunderbolt option in System Profiler and no connected devices seem to be recognized?

For Mac computers with Thunderbolt, run Software Update to install any available updates to use Thunderbolt devices with your Mac.

8. I’ve installed all available updates, but no Thunderbolt devices are recognized when I connect them with Thunderbolt to Thunderbolt cable (2 m).

Try using a different a Thunderbolt cable, using a Mini DisplayPort cable, or—in the case of a storage device—try using another supported connection method, such as USB or FireWire.

9. Can I use Target Disk Mode with a Thunderbolt to Thunderbolt cable (2 m) and a third-party storage device that uses Thunderbolt?

Yes. The Thunderbolt logo should appear with the FireWire logo when you start up a Thunderbolt-enabled Mac and have a Thunderbolt storage device connected. If you have both a Thunderbolt and a FireWire storage device connected and enter Target Disk Mode, the Thunderbolt-enabled device will be the default. If you disconnect either a Thunderbolt or FireWire storage device after successfully entering Target Disk Mode, the corresponding icon should disappear from the display.

10. Can I use Thunderbolt to Thunderbolt cable (2 m) with supported versions of Microsoft Windows on a Thunderbolt-capable Mac with Boot Camp?

Yes. Learn more about using Thunderbolt with your Mac running Windows with Boot Camp.

If you’ve played with the new Thunderbolt port or have any comments, please let us know.

Parallels Desktop 6.0.12090.660720 released

Posted by:
Date: Wednesday, June 29th, 2011, 14:02
Category: News, Software

parallelslogo1.jpg

Parallels Desktop, the popular virtualization application that allows users to run the Windows and Linux operating systems simultaneously alongside Mac OS X, reached version 6.0.12090.660720 on Wednesday. The new version, a 211 megabyte download, available here and includes the following major fixes and changes:

- Improves compatibility with Mac OS X 10.6.8.

- Resolves an issue with Finder and the Dock being unresponsive while working with icons larger than 128×128 px created by Parallels Desktop.

Parallels Desktop 6 for Mac retails for US$79.99 and requires Mac OS X 10.5.2 later to install and run.

Apple releases Java for Mac OS X 10.5 Update 10, Java for Mac OS X 10.6 Update 5

Posted by:
Date: Wednesday, June 29th, 2011, 03:14
Category: News, Software

applelogo_silver

Late Tuesday, Apple released a pair of Java updates for its Mac OS X 10.5 and 10.6 operating systems. The updates (Java for Mac OS X 10.5 Update 10 and Java for Mac OS X 10.6 Update 5) make the same changes and per Macworld, offer “improved compatibility, security, and reliability.” The specifics on how the updates do this are unclear, however, as the release notes for both the 10.6 and 10.5 updates are a little light on the details.

Both updates are available via direct download from their respective web sites or via Mac OS X’s Software Update feature.

The updates require Mac OS X 10.5.8 and Mac OS X 10.6.4 to install and run, respectively.

If you’ve tried the updates and have any feedback to offer, please let us know.

Apple releases Thunderbolt Firmware Update 1.0

Posted by:
Date: Tuesday, June 28th, 2011, 03:10
Category: News, Software

Late Monday, Apple released Thunderbolt Firmware Update 1.0, a 486 KB download focused on providing stability and performance fixes for Mac with the new Thunderbolt port. The update will restart your Mac with a gray screen a status bar to indicate the progress of the update.

While the update is taking place, do not disturb or shut off the power on your computer during this update.

The update is also available via Mac OS X’s Software Update feature and requires an Intel-based Mac running Mac OS X 10.6.7 or later to install and run.

VirtualBox updated to 4.0.10

Posted by:
Date: Tuesday, June 28th, 2011, 03:44
Category: News, Software

virtualbox.png

VirtualBox, an open source x86 virtualization project available for free has just hit version 4.0.10. The new version, a 82.8 megabyte download, sports the following list of fixes and changes:

- GUI: fixed disappearing settings widgets on KDE hosts (bug #6809).

- Storage: fixed hang under rare circumstances with flat VMDK images.

- Storage: a saved VM could not be restored under certain circumstances after the host kernel was updated (bug #8983).

- Storage: refuse to create a medium with an invalid variant (for example Split2G with VDI; bug #7227).

- Snapshots: none of the hard disk attachments must be attached to another VM in normal mode when creating a snapshot.

- USB: fixed occasional VM hangs with SMP guests (bug #4580).

- USB: proper device detection on RHEL/OEL/CentOS 5 guests (partial fix for bug #8978).

- ACPI: force the ACPI timer to return monotonic values for improve behavior with SMP Linux guests (bug #8511 and others).

- RDP: fixed screen corruption under rare circumstances (bug #8977).

- rdesktop-vrdp: updated to version 1.7.0.

- OVF: under rare circumstances some data at the end of a VMDK file was not written during export.

- Lion fixes (bug #8903).

- GNOME 3 fix.

VirtualBox 4.0.10 is available for free and requires Mac OS X 10.4 or later and an Intel-based Mac to install and run.

If you’ve tried the new version and have any feedback, please let us know.