Apple alters Chinese iPhone Wi-Fi protocol to adopt government standard

Posted by:
Date: Tuesday, May 4th, 2010, 04:36
Category: iPhone, News

3gs.jpg

Apple fought for years to break the iPhone into the Chinese marketplace and appears to be doing what it takes to stay there.

Per Macworld UK, the company appears to have tweaked its iPhone to support a Chinese security protocol for wireless networks. This follows suit as companies increasingly adopt Chinese government-backed technologies and standards to stay on the nation’s store shelves.

The move suggests Apple may soon launch a new version of the iPhone in China with Wi-Fi, a feature that regulations previously barred.

Chinese regulators last month approved the frequency ranges used by a new Apple mobile phone with 3G and wireless LAN support, as noted by China’s State Radio Monitoring Center. The device appears to be an iPhone and uses GSM and the 3G standard WCDMA, just like iPhones currently offered in China by local carrier China Unicom.

Apple removed Wi-Fi on the iPhones now sold in China because regulators there began approving mobile phones with WLAN support only last year. These units are only supported if they use a homegrown Chinese security protocol called WAPI (WLAN Authentication and Privacy Infrastructure).

The new Apple phone does support WAPI, according to the Chinese regulatory site. If an iPhone with WAPI goes on sale, Apple would be one of the highest-profile companies to offer a device using the protocol.

The new Apple phone may also support standard Wi-Fi. The Chinese security protocol is an alternative for just part of Wi-Fi, and devices can support both it and the technology it is meant to replace.

China has promoted the protocol, along with other homegrown technologies like the 3G standard TD-SCDMA, as part of a vision to produce more of its own technology and have it adopted by international companies.

Earlier this year, China Unicom chairman and CEO said the company was in talks with Apple about offering a version of the iPhone with Wi-Fi.

The new Apple device, like all mobile phones, still must obtain a network access license from regulators if its maker wants to sell it in China.

Stay tuned for additional details as they become available.

Developer submits App Store application for program that allows wireless iTunes syncing

Posted by:
Date: Tuesday, April 27th, 2010, 04:30
Category: iPhone, iPod, News, Software

3gs.jpg

Ok, this could be cool if Apple approves it.

Per Engadget, developer Greg Hughes has submitted an application that allows the iPhone and iPod touch to sync wirelessly with iTunes over Wi-Fi, and plans to submit the software to the App Store later this week.

The software, dubbed “Wi-Fi Sync,” requires a separate desktop application on either a Mac OS X or Windows machine that allows the sync to occur over a wireless network. Hughes, released the following video that shows the syncing process with the application, which must first be approved by Apple before it could be released for the App Store:



The first sync includes a pairing process that must only be done once to verify that the iPhone is to be synced with the computer. Once a handset has been paired with a computer by accepting prompts on both devices, iTunes is then launched on the computer and begins syncing with the mobile device.

It’s unknown as to whether Apple will approve the application or if it violates the company’s development rules on any level.

Apple may include printing support in iPhone OS 4.0, other update

Posted by:
Date: Wednesday, April 7th, 2010, 03:34
Category: News

A recently discovered clue is hinting that Apple may add printing support to iPhone OS 4.0 or another update of the operating system. Per AppleInsider, support notes for the iPad’s iWork apps all note that “printing directly from iPad is not currently available” and imply that it will be an option at a later date. Rumors so far haven’t confirmed whether or not it would appear in Thursday’s special event, though it presents the first clear opportunity.

Pure touchscreen tablets have been rare, but most non-Windows tablets have traditionally had printing as a key weakness. Neither Android nor iPhone OS currently have built-in faculties for printing, and many also lack USB ports. Any Apple solution would most likely involve connecting either directly to a printer over Bluetooth or over a local network using Wi-Fi.

Stay tuned for additional details as they become available.

Some users reporting Wi-Fi connectivity issues with iPad, routers

Posted by:
Date: Tuesday, April 6th, 2010, 06:47
Category: iPad, News

A number of users who purchased their iPads on April 4rd have reported that their tablets have experienced wireless connectivity issues, complete with reports of weak Wi-Fi reception, dropped signals and difficulty connecting to a network.

Per AppleInsider, a number of threads have emerged on the Apple Discussion Board with dozens of posts about Wi-Fi connection issues, ranging from a weak signal to an inability to connect to a router. Issues have been reported with a variety of routers, including Apple’s own AirPort Extreme.

“I have also noticed very weak wifi signal in my 16GB iPad,” user tdbc wrote. “Even when standing in front of the wlan router the signal fluctuates from strong to very weak. The router has very strong signals as every other computer here has full signal strength, even 20-30 meters from the router. So there is definitely a wifi signal issue here with the iPad.”

Another user, Dr. JB, said their iPad is getting just one bar of Wi-Fi signal, while a nearby MacBook Pro has strong, full reception. They said their iPad was also experiencing slow downloads due to the weak signal.

A post from powerguru revealed bandwidth data from the Speedtest.net application, which showed an iPad with 1.83 megabits per second download, compared to 14.77 megabits on the iPhone 3GS. The user also noted that the iPad uses 802.11n while the iPhone 3GS is 802.11g.

Others said their signal sometimes fluctuated, and some said resetting the network settings or restarting the iPad would temporarily fix the issue. But others who commented said they have experienced no Wi-Fi issues, suggesting the problems are not universal.

In response to some issues, Apple has set up a Knowledge Base article for users who have problems getting their iPad to rejoin known Wi-Fi networks after a restart or waking from sleep. The issue is known to occur with some third-party Wi-Fi routers that are dual-band capable.

To resolve the issue, Apple recommends creating separate Wi-Fi network names to identify each band, such as adding G to the 802.11g network name, and N to the 802.11n network name. It is also recommended that both networks use the same security type, such as WPA. If the issue persists, users can reset their network settings under Settings, General, Reset.

Stay tuned for additional details as they become available and if you’ve seen this issue or discovered a fix or workaround on your end, please let us know in the comments.

iFixIt performs complete iPad teardown, finds extended battery, other goodies

Posted by:
Date: Monday, April 5th, 2010, 04:34
Category: iPad, photos

The moment they got their mitts on one, the cool cats at iFixIt performed a complete teardown on Apple’s new iPad tablet to look at its components.

Per AppleInsider, the company’s teardown reveals that the iPad’s battery has 5.5 times the capacity of the iPhone. It’s actually two battery packs wired in parallel, the company reports, providing a total of 24.8 Watt-hours. “In contrast,” the report notes, “the iPhone 3GS has a 4.51 watt-hour battery and the MacBook Air has a 40 watt-hour battery.”

On average, the device “sips just 2.5 Watts. That’s 1/5 the power of a compact fluorescent bulb,” the report states. Even so, the larger battery demands more charging power than standard USB ports provide. It needs its included 10 watt charger, and won’t charge while syncing with a standard USB-equipped Mac or PC.

“The A4 is a Package-on-Package (PoP), with at least three layers of circuitry layered on top of each other,” the site notes. Apple’s “A4 is packaged just like the iPhone processors, microprocessor in one package and two memory modules in the other package. They’re all sandwiched together in a very nice and thin PoP.

“The iPad RAM is inside the A4 processor package. Confirming this took quite a bit of sleuthing: we had to partner with Chipworks to X-ray the processor. The X-ray revealed two layers of RAM. In addition to the ARM processor, the A4 package contains two stacked Samsung dies. We will be releasing a detailed analysis of the A4 in conjunction with Chipworks in a few days.”

The A4 contains “256MB of memory per die, for 512 MB total” the company’s teardown notes. That’s twice the system RAM of last year’s iPhone 3GS and third generation iPod touch.

Update: iFixit updated their report to note that the iPad actually incorporates the same 256MB of system RAM as the iPhone 3GS.

Physical features:
“The rear case is machined from a single billet of aluminum, increasing weight but greatly improving the rigidity of the device,” iFixIt reports, adding that “the empty void in the upper right corner [of the WiFi-only model] is where the cellular communications board would go in the 3G iPad.”

The iPad’s “touch circuit design is more similar to the old 2G and early 3G iPhones than the current 3GS,” the teardown revealed. “Chipworks informed us that ‘there is so much room in the iPad that Apple didn’t need to use small chips, just the right ones and cheap ones.’”

Additionally, the rumored slot that was once imagined to be for a camera “is actually taken up by the ambient light sensor.” iFixIt also noted that the iPad’s “glass panel is quite thick: about 1.18 mm, compared to the iPhone’s 1.02 mm thick glass. This is necessitated by the panel’s large size.”

The WiFi antennas on the iPad are mounted facing both the front corner and the back, where they penetrate through the solid aluminum back via the window provided by the black plastic Apple logo.

Apple to sell iPad from all U.S. Apple Store locations, “most” Best Buy locations this Saturday

Posted by:
Date: Monday, March 29th, 2010, 11:14
Category: iPad, News

Apple on Monday announced that its iPad tablet will go on sale this Saturday, April 3rd, at all of its 221 U.S. Apple retail locations, as well as “most” Best Buy stores.

“iPad connects users with their apps and content in a far more intimate and fun way than ever before,” Apple CEO Steve Jobs said in a press release. “We can’t wait for users to get their hands and fingers on it this weekend.”

Per AppleInsider, Apple will offer free personal setup service to all customers who purchase an iPad in-store. The service will help users to customize their iPad by setting up e-mail, loading software from the App Store and more.

All U.S. retail Apple stores will also hold special iPad workshops Saturday morning. The sessions will allow customers to learn more about the capabilities of the product.

In addition to Apple retail stores and Best Buy locations, Apple stated that the iPad will be sold through Apple authorized resellers and campus bookstores.

Best Buy’s also revealed its iPad sales information this weekend and went on to state that about 675 Best Buy locations with designated Apple departments will begin selling the device on April 3rd. The retail chain has also reportedly planned a promotion for the device on April 11th.

The April 3 launch will be for the Wi-Fi-only version of the iPad, which costs $499 for 16GB, $599 for 32GB and $699 for 64GB. The 3G-capable versions will be available in late April and carry a $130 premium.

Apple exhausts supply of U.S. iPads available for pre-order, pushes ship dates back

Posted by:
Date: Monday, March 29th, 2010, 04:17
Category: iPad, News

Apple has apparently exhausted its supply of iPads for the U.S. market per the company’s online store.

According to Macworld UK, Apple’s store noted that pre-ordered iPads might not ship until April 12th, more than a week after the tablet goes on sale. People who placed orders before the March 27th cut-off will still receive their iPads for Saturday, April 3rd, an Apple sales representative said on Sunday.

Apple began taking pre-orders for the iPad on March 12th, when it also allowed customers to reserve the tablet for pickup at Apple US retail stores. At the time, it promised to ship pre-ordered iPads so that they would arrive 3 April.

US retails stores contacted by Computerworld said that they had also exhausted their supplies of iPads available for pick-up next Saturday. However, a salesperson at a Portland, Ore. store said that reserved iPads that are unclaimed by 3 p.m. local time would be put up for sale to walk-in customers.

iPad sales have been the target of substantial speculation since Apple started taking pre-orders three weeks ago. Investment blogger Daniel Tello has been using iPad order numbers submitted by volunteers at Investor Village’s AAPL Sanity message board to estimate pre-sales. Last Friday, Tello upped his estimate to 240,000 units , a number that did not account for in-store reservations or bulk orders by businesses, schools and other organizations.

Apple will release the WiFi-only models on April 3rd in the US. The more expensive tablets that support both WiFi and 3G connectivity can be pre-ordered, but are not scheduled to ship until later, according to Apple’s online store.

If there have been any changes in your iPad order, please let us know.

iPad Preorders Accepted as of 8:30 A.M. EST

Posted by:
Date: Friday, March 12th, 2010, 05:10
Category: iPad, News

Apple has begun taking preorders for its long-awaited iPad tablet at 8:30 a.m. eastern standard time and 5:30 a.m. pacific standard time.

According to The Loop, preorders for the Wi-Fi-only iPad will begin first-thing Friday morning. The Wi-Fi iPad is set to launch in the U.S. on April 3, with the 3G capable model coming later that month.

In addition, both the Wi-Fi and 3G models will be available in the U.K., Canada, France, Germany, Australia, Italy, Japan, Spain and Switzerland in late April.

The iPad starts at US$499 for the 16GB model with Wi-Fi, going up to US$599 for 32GB and US$699 for the 64GB model. The models with both Wi-Fi and 3G connectivity, compatible only with AT&T in the U.S., carry a US$130 premium.

Stay tuned for additional details as they become available.

Apple to Release Wi-Fi iPad on April 3rd, 3G-Capable Models to Arrive in Late April

Posted by:
Date: Friday, March 5th, 2010, 08:46
Category: iPad, News

Apple finally announced that it will release the Wi-Fi version of its long-awaited iPad on Saturday, April 3rd (full press release available here) in the U.S. with 3G-capable units arriving in late April. All models of the device will be available in Australia, Canada, France, Germany, Italy, Japan, Spain, Switzerland and the UK come late April.

Users will be able to pre-order both the Wi-Fi and the 3G-capable units from Apple’s online store come March 12th or reserve a Wi-Fi model to pick up on Saturday, April 3, at an Apple retail store.

Prices are slotted at US$499 for the 16GB unit, US$599 for the 32GB unit US$699 for 64GB unit. The Wi-Fi + 3G models will be available in late April for a suggested retail price of US$629 for 16GB, US$729 for 32GB and US$829 for 64GB.

Stay tuned for additional details as they become available and let us know if you plan to snag an iPad at launch or wait a bit…

Battery-Powered Wi-Reach Classic Converts 3G/4G Cards Into Wi-Fi Hotspot

Posted by:
Date: Tuesday, February 16th, 2010, 08:18
Category: News

This could be nifty.

Per Business Wire, Connect One‘s battery powered Wi-Reach Classic allows users to insert a 3G or 4G USB card to create a portable Wi-Fi hotspot that can allow up to 10 Wi-Fi-enabled devices to connect to the Internet. The device will support the WiMax and LTE protocols after a future firmware update and car reportedly run for up to five hours on a full charge as well as recharge over a USB connection.

wi-reach-classic

The Wi-Reach Classic is available now for US$99.